Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 80064 | NAVAL SHIP SYSTEMS COMMAND |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| ABHP | OVERALL LENGTH | 18.500 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.1220 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.9595 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 1.122 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 2 |
| AAHP | SECOND END STYLE | SPLINED (STRAIGHT) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 CLASS A FED SPEC SINGLE MATERIAL RESPONSE |
| AMGA | SECOND END SPLINE LENGTH | 3.313 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.9350 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |
| MATT | MATERIAL | NICKEL ALLOY |
| AMFZ | SECOND END DIAMETER | 1.1220 INCHES NOMINAL |
| BDSR | SECOND END SPLINE QUANTITY | 10 |